Description: This dataset identifies of potential and actual acid sulfate soil land as a trigger map based on Australian Height Datum derived from 2008 ALS data.
Copyright Text: Environment and Sustainability Branch and Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This dataset identifies of potential and actual acid sulfate soil land identifying each category based on Australian Height Datum derived from 2008 ALS data.
Copyright Text: Environment and Sustainability Branch and Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Value: Potential and actual acid sulphate soils >5 metre AHD <= 20m AHD Label: Potential and actual acid sulphate soils >5 metre AHD <= 20m AHD Description: N/A Symbol:
Description: This dataset was developed using a variety of criteria including zone, property size, Remnant Vegetation, Locally Significant Vegetation, and Wetlands and Waterway buffers. Features classified into either Primary or Secondary Vegetation Management area.
Copyright Text: Environment and Sustainability Branch - Strategy and Sustainability - Logan City Council
Description: This dataset was developed using a variety of criteria including zone, property size, Remnant Vegetation, Locally Significant Vegetation, and Wetlands and Waterway buffers. Features classified into either Primary or Secondary Vegetation Management area.
Copyright Text: Environment and Sustainability Branch - Strategy and Sustainability - Logan City Council
Description: Melaleuca irbyana vegetation was mapped by the Qld Herbarium at scale of 1:25,000 in 2009. Edge effect buffers and hydrology buffers were developed by Logan City Council and apply to Remnant and Regrowth melaleuca irbyana areas for use in the new Logan Planning Scheme (2013-2014) and as a guideline to current development.
Copyright Text: Environment and Sustainability Branch - Strategy and Sustainability - Logan City Council
Description: This dataset was created using Vegetation types (Regional ecosystems) provided by expert panel and tree cover (>=2.5m high) vegetation derived from ALS data. Environment and Sustainability created for use in the Logan Planning Scheme (2015).
Copyright Text: Environment and Sustainability Branch - Strategy and Sustainability - Logan City Council
Description: This dataset was developed using habitat factors such as flood, pre-clear vegetation type, elevation and expert opinion to identify and protect areas where the endangered Gossia gonoclada may occur.
Copyright Text: Environment and Sustainability Branch - Strategy and Sustainability - Logan City Council
Description: This dataset was developed to protect Remnant Vegetation (version 8) that may not be listed as Endangered at a State level, however within Logan there is less than 10% of it remains and it is therefore important to protect.
Copyright Text: Environment and Sustainability Branch - Strategy and Sustainability - Logan City Council
Unique Value Renderer: Field 1: OVL2_DESC Field 2: N/A Field 3: N/A Field Delimiter: , Default Symbol:
N/A
Default Label: N/A UniqueValueInfos:
Value: Matters of both state and local ecological significance - regulated vegetation (intersecting a watercourse) Label: Both matters of local and state significance Description: N/A Symbol:
Value: Matters of state ecological significance - regulated vegetation (intersecting a watercourse) Label: Matters of state significance Description: N/A Symbol:
Description: The State-wide Bushfire Hazard Area (Bushfire Prone Area) was produced for use by local governments to inform the preparation of planning schemes. The Bushfire Hazard Area (Bushfire Prone Area) identifies areas with the potential to support a significant bushfire or the potential to be subject to significant bushfire impacts. Additional Information: This product is the vector (unsmoothed) version of State-wide mapping of the Bushfire Hazard Area (Bushfire Prone Area) developed by the Commonwealth Scientific and Industrial Research Organisation (CSIRO) in conjunction with QFES and PSBA. Methodology Summary: Potential intensity classes within the Bushfire Hazard Area (Bushfire Prone Area) are calculated by firstly combining information on Potential Fuel Load, Maximum Landscape Slope and Fire Weather Severity to calculate Potential Fire-line Intensity. Potential Fire-line Intensity is then divided into three potential bushfire intensity classes - Very High, High and Medium. Potential Impact Buffers are calculated to include all land within 100m from areas of medium, high or very high potential bushfire intensity. Further details about the methodology are provided in the CSIRO report (i.e. Leonard, J., Newnham, G., Opie, K., and Blanchi, R.. (2014) A new methodology for state-wide mapping of bushfire prone areas in Queensland. CSIRO, Australia.) included in this data pack. This dataset identifies the potential bushfire hazard areas throughout Logan to support Overlay Map of the Logan Planning Scheme 2015.
Copyright Text: State of Queensland - Public Safety Business Agency - 2015
Description: The State-wide Bushfire Hazard Area (Bushfire Prone Area) was produced for use by local governments to inform the preparation of planning schemes. The Bushfire Hazard Area (Bushfire Prone Area) identifies areas with the potential to support a significant bushfire or the potential to be subject to significant bushfire impacts. Additional Information: This product is the vector (unsmoothed) version of State-wide mapping of the Bushfire Hazard Area (Bushfire Prone Area) developed by the Commonwealth Scientific and Industrial Research Organisation (CSIRO) in conjunction with QFES and PSBA. Methodology Summary: Potential intensity classes within the Bushfire Hazard Area (Bushfire Prone Area) are calculated by firstly combining information on Potential Fuel Load, Maximum Landscape Slope and Fire Weather Severity to calculate Potential Fire-line Intensity. Potential Fire-line Intensity is then divided into three potential bushfire intensity classes - Very High, High and Medium. Potential Impact Buffers are calculated to include all land within 100m from areas of medium, high or very high potential bushfire intensity. Further details about the methodology are provided in the CSIRO report (i.e. Leonard, J., Newnham, G., Opie, K., and Blanchi, R.. (2014) A new methodology for state-wide mapping of bushfire prone areas in Queensland. CSIRO, Australia.) included in this data pack. This dataset identifies the potential bushfire hazard areas throughout Logan to support Overlay Map of the Logan Planning Scheme 2015.
Copyright Text: State of Queensland - Public Safety Business Agency - 2015
Description: The purpose of this map is to identify areas where there is a need to ensure extractive resources can be extracted and distributed without interference from incompatible uses, and that sites are rehabilitated once extraction is complete. Note that the buffers for Key Resource Areas 71 and 72 fall within Logan's boundaries, despite the KRAs themselves lying within Redlands City Council area. Developed using State Government mapping, previous planning schemes, aerial photography, and advice from Council's Roads Construction & Maintenance branch. Buffers added based on resource type (200m, hard rock = 1km).
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This dataset identifies areas where there is a need to ensure that development is compatible with the transporting of extractive resources (i.e. does not include a sensitive land use).
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This dataset identifies areas where there is a need to ensure that development does not compromise the efficient existing or future winning of the extractive resources having regard to the nature, type, duration of the use, and the infrastructure necessary to service the use.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This dataset identifies areas where there is a need to ensure that development does not adversely impact the safety and efficiency of vehicles transporting extractive resources.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This dataset identifies a 200 metre buffer of areas where there is a need to ensure that development does not include a sensitive land use or result in an increase in the number of people living in a separation area, nor impede safe operation of the extractive industry, and minimises the adverse effect of the extractive industry on people working or congregating in the area.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This Logan Planning Scheme may be cited as Logan Planning Scheme 2015. The Flooding TLPI 2013 data set is the basis for this Logan Planning Scheme 2015 data set. The following new flood studies (either replacing older studies or a complete new study) have been added /amended to TLPI 2013, to create Logan Planning Scheme 2015. Updated Logan and Albert Rivers regional flood study, updated 20 local studies and Native Dog Creek local flood study.
Copyright Text: River and Catchment Engineering - Road Infrastructure Planning Branch - Road and Water Infrastructure - Logan City Council; Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Name: OM-06 Greenbank Training Area buffer overlay
Display Field: Ovl2_Desc
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: This dataset identifies land used for defence training purposes. This dataset includes a 1 kilometre buffer surrounding land used for defence training purposes.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This dataset identifies sites (properties, gravesites) with cultural heritage values to be protected (e.g. ensure graves are not disturbed, heritage buildings are retained, photographic records are captured where appropriate, and heritage form, character and setting is retained). Sites listed in the following are not included in this mapping: Aboriginal Cultural Heritage Act 2003, Queensland Heritage Act 1992 (State register), Environmental Protection and Biodiversity Conservation Act 1999 (national register).
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This dataset identifies sites (properties, gravesites) with cultural heritage values to be protected (e.g. ensure graves are not disturbed, heritage buildings are retained, photographic records are captured where appropriate, and heritage form, character and setting is retained). Sites listed in the following are not included in this mapping: Aboriginal Cultural Heritage Act 2003, Queensland Heritage Act 1992 (State register), Environmental Protection and Biodiversity Conservation Act 1999 (national register).
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Name: OM-08.00 Landslide hazard and steep slope area trigger
Display Field: OVL2_DESC
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: Overlay Map 8a showing all slope areas for Logan Planning Scheme 2015 which was extracted from the Lidar derived product supplied by Fugro Spatial on 18 July 2013.
Copyright Text: Fugro Spatial Solutions Pty Ltd, Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: Overlay Map 8b showing historical landslide areas for the Logan Planning Scheme 2015 which was extracted from the Lidar derived product supplied by Fugro Spatial on 18 July 2013.
Copyright Text: Fugro Spatial Solutions Pty Ltd, Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: Overlay Map 8b showing 12% slope investigation areas for Logan Planning Scheme 2015 which was extracted from the Lidar derived product supplied by Fugro Spatial on 18 July 2013.
Copyright Text: Fugro Spatial Solutions Pty Ltd, Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Name: Equal to or greater than 12 percent slope hazard area
Display Field: OVL2_DESC
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: Overlay Map 8b showing 12% or greater slope areas for Logan Planning Scheme 2015 which was extracted from the Lidar derived product supplied by Fugro Spatial on 18 July 2013.
Copyright Text: Fugro Spatial Solutions Pty Ltd, Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Name: Equal to or greater than 15 percent slope hazard area
Display Field: OVL2_DESC
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: Overlay Map 8b showing 15% or greater slope areas for Logan Planning Scheme 2015 which was extracted from the Lidar derived product supplied by Fugro Spatial on 18 July 2013.
Copyright Text: Fugro Spatial Solutions Pty Ltd, Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This base mapping includes: Powerlink - data on location of infrastructure; Energex - data on location of infrastructure; Logan Water - data on location of infrastructure; Logan City Council aerial photography 2008; Department of Natural Resources and Mines - Digital Cadastral Database October 2014; and SEQWater – data on location of infrastructure.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This base mapping includes: Powerlink - data on location of infrastructure; Energex - data on location of infrastructure; Logan Water - data on location of infrastructure; Logan City Council aerial photography 2008; Department of Natural Resources and Mines - Digital Cadastral Database October 2014; and SEQWater – data on location of infrastructure.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: Powerlink - data on location of infrastructure; Energex - data on location of infrastructure; Logan Water - data on location of infrastructure; Logan City Council aerial photography 2008; Department of Natural Resources and Mines - Digital Cadastral Database October 2014; and SEQWater – data on location of infrastructure.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This dataset identifies the 110kv and 275kv powerline infrastructure to ensure safe development surrounding this infrastructure. This dataset also includes a 40m buffer around the 275kv power line.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Name: OM-10.00 Strategic airport and environs trigger
Display Field: OM_DESC
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: The purpose of this map is to identify areas where there is a need to ensure that development does not create hazards or obstruction in the operational airspace for Archerfield Airport (e.g. through height of cranes, creation of emissions, air turbulence, reduction of visibility, attraction of significant numbers of birds/bats, etc.).
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This data relates to the Obstacle Limitation Surfaces relative to Archerfield airport (surfaces that set height limits of objects around an aerodrome). E.g. operation of cranes during development must not penetrate the Obstacle Limitation Surface.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This data relates specification to the bird, and, or bat strike area relative to Archerfield airport. Development must not attract birds and bats into the Archerfield airport’s operational airspace in significant numbers likely to cause a safety hazard to airport operations.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This dataset identifies the water resource catchment areas throughout Logan for the use in overlay map 12 of the Logan Planning Scheme 2015.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This dataset identifies the water resource catchment areas throughout Logan for the use in overlay map 12 of the Logan Planning Scheme 2015.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: Calculated Distance Indicative Erosion Prone Area. Erosion due to storm impact and long term trends of sediment loss and channel migration (Erosion prone area all components, Version 4).
Copyright Text: State of Queensland - Department of Environment and Heritage Protection - 2015
Description: This dataset was developed from data produced by Rastermatics which was derived from 2008 ALS data. To be used in conjunction with the Waterway_Corridor Feature Class which identifies buffers from the top bank.
Copyright Text: Environment and Sustainability Branch - Strategy and Sustainability - Logan City Council
Description: This dataset was developed from data produced by Rastermatics which was derived from 2008 ALS data. To be used in conjunction with the Wetland_Protection_Area Feature Class which identifies buffers from the edge of the wetlands.
Copyright Text: Environment and Sustainability Branch - Strategy and Sustainability - Logan City Council
Description: This dataset was developed from data produced by Rastermatics which was derived from 2008 ALS data. To be used in conjunction with the Wetland_Area Feature Class which identifies corresponding wetlands.
Copyright Text: Environment and Sustainability Branch - Strategy and Sustainability - Logan City Council
Description: This dataset was developed from data produced by Rastermatics which was derived from 2008 ALS data. To be used in conjunction with the Waterway_Corridor Feature Class which identifies buffers from the top bank.
Copyright Text: Environment and Sustainability Branch - Strategy and Sustainability - Logan City Council
Description: This dataset was developed from data produced by Rastermatics which was derived from 2008 ALS data. To be used in conjunction with the Wetland_Protection_Area Feature Class which identifies buffers from the edge of the wetlands.
Copyright Text: Environment and Sustainability Branch - Strategy and Sustainability - Logan City Council
Description: This dataset was developed from data produced by Rastermatics which was derived from 2008 ALS data. To be used in conjunction with the Wetland_Area Feature Class which identifies corresponding wetlands.
Copyright Text: Environment and Sustainability Branch - Strategy and Sustainability - Logan City Council
Description: Calculated Distance Indicative Erosion Prone Area. Erosion due to storm impact and long term trends of sediment loss and channel migration (Erosion prone area all components, Version 4).
Copyright Text: State of Queensland - Department of Environment and Heritage Protection - 2015
Name: LGIP - 01.00 Priority infrastructure area and projection area
Display Field:
Type: Group Layer
Geometry Type: null
Description: Priority infrastructure areas and projection areas - where suitable and adequate development infrastructure exists, or where it can be provided most efficiently, and where priority is given to provide trunk infrastructure for urban development up to 2021.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: The Priority Infrastructure Area is the area that will accommodate future urban growth. The primary purpose of the Priority Infrastructure Area is to encourage urban growth in area where suitable and adequate development infrastructure exists, or where it can be provided efficiently.
Copyright Text: Infrastructure Policy - Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Name: LGIP - 02.00 Net developable area and planned density area
Display Field: Development_Area
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: Plan density means the realistic scale of development likely to occur within the Local Government Infrastructure Plan planning horizon. It is in accordance with the most up to date land use planning provisions of the Logan Planning Scheme 2015.
Copyright Text: Infrastructure Policy - Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Name: LGIP - 03.00 Plan for trunk water supply infrastructure
Display Field:
Type: Group Layer
Geometry Type: null
Description: Local Government Infrastructure Plan for trunk water supply infrastructure. Includes reservoirs, inlets, outlets, pump stations, mains - existing and future.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Name: LGIP - 04.00 Plan for trunk sewerage infrastructure
Display Field:
Type: Group Layer
Geometry Type: null
Description: Local Government Infrastructure Plan for trunk sewerage - displays network planning areas, existing and future sewerage infrastructure - pump stations, treatments plants, mains.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This dataset identifies proposed trunk sewerage infrastructure items, which includes sewerage pump stations and sewerage treatment plants etc.
Copyright Text: Wastewater Infrastructure Planning - Water Infrastructure - Logan City Council
Description: This dataset identifies proposed trunk sewerage infrastructure items, which includes sewerage pump station and sewerage treatment plants etc.
Copyright Text: Wastewater Infrastructure Planning - Water Infrastructure - Logan City Council
Description: This dataset identifies existing trunk sewerage infrastructure items, which includes sewerage treatment plants and sewerage pump stations at the base date 30 June 2014.
Copyright Text: Wastewater Infrastructure Planning - Water Infrastructure - Logan City Council
Description: This dataset identifies existing trunk sewerage infrastructure items, which includes rising and gravity mains generally having a minimum diameter of 225mm and above at the base date 30 June 2014.
Copyright Text: Wastewater Infrastructure Planning - Water Infrastructure - Logan City Council
Name: LGIP - 05.00 Plan for trunk stormwater infrastructure
Display Field:
Type: Group Layer
Geometry Type: null
Description: Local Government Infrastructure Plan for trunk stormwater - displays network planning areas, existing and future stormwater infrastructure, including acquisition. Includes pipes, pits, pollutant traps, wetlands basins.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This dataset locates proposed detention basins, scour protection, kerb lowering and open channel areas for land acquisition in accordance with the stormwater Schedule of Works.
Copyright Text: River and Catchment Engineering - Road Infrastructure Planning - Logan City Council
Description: Stormwater service catchment defines an area for which the local government has estimated the existing and projected planned demand for trunk stormwater network.
Copyright Text: River and Catchment Engineering - Road Infrastructure Planning - Logan City Council
Name: LGIP - 06.00 Plan for trunk movement infrastructure
Display Field:
Type: Group Layer
Geometry Type: null
Description: Local Government Infrastructure Plan for trunk road infrastructure - displays network planning areas, existing and future road infrastructure, including intersection upgrades, land acquisition.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This dataset identifies proposed cycle trunk infrastructure in accordance with the cycle network schedule of works as part of the Local Government Infrastructure Plan.
Copyright Text: Transport and Infrastructure Planning - Road Infrastructure Planning - Logan City Council
Description: This dataset locates the proposed trunk land for local road infrastructure in accordance with the transport network schedule of works as part of the Local Government Infrastructure Plan.
Copyright Text: Transport and Infrastructure Planning - Road Infrastructure Planning - Logan City Council
Description: This dataset locates the existing state and local trunk road infrastructure in accordance with the transport network schedule of works as part of the Local Government Infrastructure Plan.
Copyright Text: Transport and Infrastructure Planning - Road Infrastructure Planning - Logan City Council
Name: LGIP - 07.00 Plan for trunk parks infrastructure
Display Field:
Type: Group Layer
Geometry Type: null
Description: Local Government Infrastructure Plan for trunk park infrastructure - displays network planning precincts, existing and future park infrastructure, recreation and sport local, district, metro.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This dataset identifies the investigation and proposed trunk park infrastructure to meet the desired standard of service and take into account predicted future population growth in terms of the provisions of the Logan Planning Scheme 2015.
Copyright Text: Parks Planning, Design and Capital Delivery - Parks - Logan City Council
Name: LGIP - 08.00 Plan for land for community facilities infrastructure
Display Field:
Type: Group Layer
Geometry Type: null
Description: Local Government Infrastructure Plan for trunk land for community facilities infrastructure - displays existing and future community infrastructure including art galleries, community centres, indoor sports facilities, libraries, museums, performing arts, aquatic / pools.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: This dataset identifies the proposed trunk land for community facilities infrastructure planned to service the anticipated growth up to the planning horizon of the Local Government Infrastructure Plan.
Copyright Text: Social Planning - Community Services - Logan City Council
Description: This dataset identifies the existing trunk infrastructure for the land for community facilities network, including trunk land for community facilities which are chargeable and non chargeable,as well as non-trunk community facilities such as private halls and spaces, as well as schools.
Copyright Text: Social Planning - Community Services - Logan City Council
Description: The Priority Infrastructure Area is the area that will accommodate future urban growth. The primary purpose of the Priority Infrastructure Area is to encourage urban growth in area where suitable and adequate development infrastructure exists, or where it can be provided efficiently.
Copyright Text: Infrastructure Policy - Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Name: FIG 6.2.12.3.1-3 Agricultural land classification
Display Field: Description
Type: Feature Layer
Geometry Type: esriGeometryPolygon
Description: The Department of Natural Resources and Mines (DNRM), South East Queensland Agricultural Land Class mapping, 3 April 2014. Council has been approved to use this data set by Department of State Development and Infrastructure Planning (DSDIP), as of October 2014. DNRM data layer called SEQ_AGRICULT_LAND_CLASS_CUR.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Description: The Ecological Significance map was created by Logan City Council using multi-criteria analysis to identify areas of higher ecological significance and those with lower ecological significance in the city.
Copyright Text: Environment and Sustainability Branch - Strategy and Sustainability - Logan City Council
Description: The cycle network mapping is used to identify the classification and location of existing and planned cycle routes within Logan. The cycle network mapping identifies the classification of cycle routes in accordance with the cycle network planning guidelines detailed in Table 3.4.1.2.1 of Planning Scheme Policy 5.
Copyright Text: Transport & Infrastructure Planning - Road Infrastructure Planning Branch - Road and Water Infrastructure - Logan City Council
Description: Priority Development Areas (PDAs) are parcels of land within Queensland, identified by the Department of State Development, Infrastructure and Planning (DSDIP) for specific accelerated development with a focus on economic growth.
Copyright Text: Economic Development and Strategy Branch - Strategy and Sustainability - Logan City Council
Value: Open Space - Indicative Recreation - District Label: Existing and proposed parks Description: Existing and Priority
Infrastructure Plan (PIP)
Parks Symbol:
Value: Open Space - Indicative Recreation - Metropolitan Label: Existing and proposed parks Description: Existing and Priority
Infrastructure Plan (PIP)
Parks Symbol:
Value: Open Space - Indicative Sports - District Label: Existing and proposed parks Description: Existing and Priority
Infrastructure Plan (PIP)
Parks Symbol:
Value: Open Space - Environmental Conservation Label: Existing and proposed parks Description: Existing and Priority
Infrastructure Plan (PIP)
Parks Symbol: